Usage: Suitable for BOPP / PVC / PE / Mei Wen paper / imported high-grade double-sided tape / kraft paper tape / conductive foam adhesive / cloth base / industrial tape, etc.
Cut and cut.
Characteristic:
1. main drive part: using Taiwan AC motor and frequency converter as the material for cutting coil material, acceleration and deceleration is stable and fast.
2. Central control unit: using programmable central control, coaxial can be set in a variety of sizes (up to 20 modes) one-time automatic conversion cutting,
Do not operate automatically.
3. Operating panel part: Operating interface adopts 10.4 inch of Taiwan Weilun LCD touch screen, which can set various cutting conditions and running gear on the screen directly.
The situation.
4. Motor control system: The central control system is PLC programmable controller, coaxial can set a variety of sizes, the computer automatically adjusts the cutting when cutting.
Cut the width.
5. Cutting roll positioning system: using Japanese and European series brand servo motor control, high-precision imported ball screw size positioning and linear sliding rail
Carrying the knife seat, the positioning movement is accurate and smooth.
6. Feed positioning system: using Japanese and European series brand servo motor to control the feed mode, can simulate the three-stage speed feed cutting roll, improve efficiency
Rate and the best quality.
7. Round knife automatic angle adjustment: using Japanese and European series of servo motors to calculate the angle of round knife, according to different materials to make different angle changes
When the cutting plane is not good, the cutting angle can be changed directly, the number of tool changes can be reduced, and the manual angle adjustment can be avoided.
Trouble, greatly improve the efficiency of production.
8. quick shaft change device: This machine has two cutting axes to choose from, and adopts quick shaft changing mode to meet different material needs.
9. (optional) installed a large safety shield, greatly improving the safety performance of the machine operation.
Main technical parameters:
Machine width 1.0M 1.3M 1.6M
Cutting precision of + 0.1mm
Maximum winding diameter 150mm
Minimum winding width 1mm
Diameter of a circular knife with a diameter of 180-200mm | 
